Friday, November 22, 2019

You gotta try this!

 OK, I am pretty excited. I figured out another way to quilt as you go. Here's my trial sample, two small blocks quilted and joined with my new and improved version III method. It really is so much better and easier (if I do say so myself). And they have been squared off before joining, which is also part of the improvement.
What you are looking at is a way to connect blocks or even larger sections of a quilt, with fabric to enhance the design, fabric that is special, that you don't want to waste by putting it on the back.  Version II used good backing fabric and only a small part of it showed on the front, which I felt was a waste of pretty fabric.
Here's an example of version II quilt as you go.  Using 'good' fabric for the backing and cutting it much larger than the blocks that were quilted onto it, the extra edges of the fabric was then used to join the two sections, and then folded over and quilted down. 
A problem occurs when quilting distorts the blocks and they can't be trimmed evenly, easily. But with my new version, III, you can quilt the blocks or lengths of blocks, trim them to the edge, so you know they are going to fit, and connect them, which is the next part I want you to see. This is the back side of two blocks joined with contrasting connecting strips. The backing fabric used here purposely for the sample was just some leftover pieces that didn't work, so no biggie. 
Here's what to do...after you have quilted your blocks, cut connecting strips in your desired fabric 1.5" wide and longer than the blocks you want to connect.

Sew the connecting strips onto the back of the quilted blocks with right sides together.
It's OK to leave a little extra on the strips which can be trimmed later after the two are sewn together.
 Turning the strips to the front, align the two blocks and sew together with a 1/4" seam. I found that it was necessary to put my foot right onto the block to get my needle as close to the edge as was possible. 
The two strips are sewn and ready to be turned under.

The strip is folded in half, pressed and pinned and then top stitched through all layers. 
 Three blocks joined. The strips can now be trimmed even with both blocks.
So what makes me happier with this method is:
1. trimming or squaring each of the blocks after quilting them individually
2. adding contrasting connecting fabrics to enhance the design
3. using appropriate backing fabric, or even multiple fabrics, having nothing to do with the design of the top.
4. this is not limited to sewing small blocks together. Panels would work just as easily, which is pretty much what I would do, as it would reduce the number of steps in joining the quilted parts.
5. quilting off the edge of the block and trimming it later. see reason #1.
Anyway, I have plans to do this method with the top I have up on the design wall, unfinished at the moment.
 By the way version one is on my old blog, http://fibermania.blogspot.com/p/quilt-as-you-go.html
As far as I am concerned, don't even bother with version II, just leap forward to version III and save yourself and your good fabric for the fronts of your work.

UPDATE:
 Four big blocks joined with complimentary connecting strips.


12 comments:

  1. Thanks for sharing that! Your tutorial is very clear.
    I think your version III is brilliant! I've seen similar methods but yours makes sense.

    ReplyDelete
  2. Thanks for the great tutorial-another new thing for me to try. This is pretty exciting because I've never been successful with machine quilting ( even a small quilt size) but I may be able to quilt each block individually-definitely looks doable.

    ReplyDelete
  3. Brilliant! This is the way I will use to sew the "Skitch a Day" challenge together. thank you

    ReplyDelete
  4. Thanks for the tutorial. I love quilt as you go and this is an improvement I can use.

    ReplyDelete
  5. Thanks Melody. So much easier than the old way or Version I and II.

    ReplyDelete
  6. I love this!! I've been too chicken to try it myself. :)

    Becky from Indiana

    ReplyDelete
  7. TOTALLY love the idea of 2 strips as connectors. I have a project in mind where I am absolutely going to do this! Thanks for sharing.. And I love the improv quilt you ladies are making. (I'm so happy you are blogging again).

    ReplyDelete
  8. What a great idea! I've never done a quilt as you go because I did not like the way they were put together. Now I'm going to try it using your method on a lap quilt to see how I like it. Thank you for sharing your discovery with your readers.

    ReplyDelete
  9. I love this, Mel. I’m always interested in Quilt As You Go because I can no longer quilt large quilts. This seems like the best way to go. I’m trying it ASAP. Thanks for the tutorial.

    ReplyDelete
  10. Melody, different topic: can you direct me to the post describing how you figured out how to post to Instagram from your computer? THANKS!

    ReplyDelete
  11. OMG! Mel, you are a genius. I was reluctant to do more QAYG because the joining process was such an issue. Yay! Not any more, Thank you and hugs,

    ReplyDelete